|
Chlorine
Valves
|
 |
FluoroSeal sleeved plug valves
are manufactured in accordance with the recommendations of the
Chlorine Institute and provide superior performance on this demanding
application. All FluoroSeal chlorine valves
are made from thoroughly cleaned and dried components under controlled
conditions and this control is maintained through parts preparation,
assembly, testing to special protective packaging.
|
Vented
Chlorine valves are provided with a pressure relief vent hole in the side of the plug to relieve pressure to the upstream side. This modification results in a uni-directional valve which is indicated on the valve with a flow direction arrow.
Vent holes can also be provided in the bottom of the plug upon request. |
|
Dry Chlorine Service Valve Figure Number Selection Guide
|
| 1/2"-2" Screwed end |
Fig.302SE-WCB/MO-Chl
|
|
1/2"-2" Socket weld end
|
Fig.302SW-WCB/MO-Chl
|
|
1/2"-4" Flanged end
|
Fig.302F-WCB/MO-Chl
|
|
4"-12" Flanged end /Gear operated
|
Fig.302F/EG-WCB/MO-Chl
|
(3-way chlorine valves are also available.) |
|
|
MATERIALS OF CONSTRUCTION
|
|
|
| |
Body |
Carbon
Steel |
| |
Plug* |
Monel |
| |
Cover |
Carbon
Steel |
| |
Cover
Bolts** |
Steel |
| |
Adjusting
Bolts |
Monel |
| |
Trust
Washer |
Monel |
| |
Metal
Diaphragm |
Monel |
| |
Delta
Ring |
PTFE |
| |
Diaphragm |
PTFE |
| |
Sleeve |
PTFE |
|
|
|
|
|
See
Technical Section for material specifications.
* Plug
- also available in hastelloy C
** Cover bolts - also available in monel |
|
|
|
Copyright © 2000 Fluoroseal Specialty Valves